Kali ini saya akan membagikan cara untuk reset perangkat DELL Force 10 S4810 (Switch) yang menggunakan OS9.
Post ini juga sebagai catatan saya agar tidak lupa.
Dalam case ini switch yang akan di reset tidak tergabung dalam stack-unit atau single switch.
Masuk ke usermode yang ditandai dengan tanda #
Untuk melihat stack yang aktif bisa menggunakan perintah berikut
Dell#show system stack-unit 0Parameter 0 bisa diganti dengan 0 sampai 11 karena dalam case kami untuk stack unit bisa sampai 12 stack
Jika terdapat stack yang aktif output nya sebagai berikut
Dell#show system stack-unit 0
-- Unit 0 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S4810 - 52-port GE/TE/FG (SE)
Current Type : S4810 - 52-port GE/TE/FG (SE)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 64
Up Time : 15 min, 39 sec
Dell Networking OS Version : 9.7(0.0)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 1.2.0.5
Memory Size : 2147483648 bytes
Temperature : 51C
Voltage : ok
Serial Number : HADL15C720084
Part Number : 7590009602 Rev F
Vendor Id : 07
Date Code : 01502015Perintah untuk reset konfigurasinya adalah sebagai berikut
Dell#restore factory-defaults stack-unit 0 clear-allJika muncul pertanyaan:
***********************************************************************
* Warning - Restoring factory defaults will delete the existing *
* startup-config and resets all persistent settings (stacking, *
* fanout, etc.) and boot environment variables (boot config, console *
* baud rate, management interface settings, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
***********************************************************************
Proceed with factory settings? Confirm [yes/no]:yesJawab yes
Setelahnya akan muncul output seperti berikut:
-- Restore status --
Unit Nvram Config Bootvar
-----------------------------------
0 Success Success Success
Power-cycling the unit(s).
syncing disks... 9 done
unmounting file systems...
unmounting /f10/ConfD/db (mfs:382)...
unmounting /f10/flash (/dev/ld0h)...
unmounting /tmpimg (mfs:325)...
unmounting /usr/pkg (/dev/ld0g)...
unmounting /usr (mfs:35)...
unmounting /f10 (mfs:21)...
unmounting /kern (kernfs)...
unmounting / (/dev/md0a)... done
rebooting
▒
U-Boot 2009.11(Dell) (Apr 06 2014 - 08:44:55)
Built by build at Unknown host on Sun Apr 6 8:44:54 2014
S4810 Boot selector Label 1.2.0.5
CPU0: P2020, Version: 2.1, (0x80e20021)
Core: E500, Version: 5.1, (0x80211051)
Clock Configuration:
CPU0:1200 MHz, CPU1:1200 MHz,
CCB:600 MHz,
DDR:396 MHz (792 MT/s data rate) (Asynchronous), LBC:37.500 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: S4810 Dell Inc.
Cpld: S4810 cpld Rev 7
Cpld: Board Revision 2
Cpld: Board Type 1
I2C: ready
DRAM: Initializing.... DDR: 2 GB (DDR3, 64-bit, CL=6, ECC off)
FLASH: 128 MB
L2: 512 KB enabled
MMC: FSL_ESDHC: 0
CPLD: HW Watchdog enabled
eTSEC2 is in sgmii mode.
eTSEC3 is in sgmii mode.
PCIE1 used as Root Complex (base addr e000a000)
Scanning PCI bus 01
01 00 14e4 b845 0200 00
PCIE1 on bus 00 - 01
In: serial
Out: serial
Err: serial
Net: eTSEC3: PHY is Broadcom BCM5461S (2060c1)
eTSEC3
Hit Esc key to interrupt autoboot: 0
Booting primary bootline....
f8000000
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at f80400f0 ...
Image Name: netbsd
Image Type: PowerPC NetBSD Kernel Image (gzip compressed)
Data Size: 11008761 Bytes = 10.5 MB
Load Address: 00100040
Entry Point: 00100040
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
CPLD: HW Watchdog disabled
## Transferring control to NetBSD stage-2 loader (at address 00100040) ...
initppc(0x100040, 0x383a000, 0x7df6ffb0, 0x0, 0x7ffacef8, 0x7ffacef8)<enter> pixis_spd=0xff sysclk=7 pixis_sysclk=166666667 porpllsr=0x4444180c sys_clk=100000000 comcnfreq=600000000 openpic-reset(ctpr=15) cache(DC=32KB/32,IC=32KB/32) bptr=0 memprobe=2048MB e500_tlbinit(0x383a000,2048MB) hid0=0x80004080/0x80804080 hid1=0x44003040 pordevsr=0x83783c40 devdisr=0x7080000 msgbuf=0x7fffe000 exception_init=0xe536f4 uvm_page_physload(0x383a,0x7fffd,0x383a,0x7fffd,0) kern_segtab=0x383a000powerpc_fixup_stubs: 1634 fixups done in 3790288 cycles
Loaded initial symtab at 0x13065ec, strtab at 0x13c5e4c, # entries 48932
initppc done!
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Dell Networking OS Release 9.7(0.0)
NetBSD 5.1_STABLE (MPC4810) #0: Fri Feb 27 07:26:22 PST 2015
total memory = 2048 MB
avail memory = 1952 MB
mainbus0 (root)
cpunode0 at mainbus0 node 0
cpunode0: 512KB/32B 8-banked 8-way unified L2 cache
cpu0 at cpunode0 instance 1
cpu0: 1.20 GHz P2020 2.1 with an e500v2 5.1 core, ID 0 (Primary)
cpu0: 32KB/32B 8-way L1 data cache
cpu0: 32KB/32B 8-way L1 instruction cache
cpu0: 2 TLBs, 3 concurrent 8-bit PIDs (256 total)
cpu0: tlb0: 512 fixed-size (4KB) 4-way set associative entries
cpu0: tlb1: 16 variable-size (4KB..4GB) fully associative entries
cpu1 at cpunode0 instance 2
cpu1: disabled (uniprocessor kernel)
obio0 at cpunode0: 2 of 8 ports enabled
obio0: cs0: 128MB 16-bit GPCM region at 0xf8000000
obio0: cs3: 32KB 8-bit GPCM region at 0xefdf0000
bootflash0 at obio0 cs 0 addr 0xf8000000 size 0x8000000Flash Start Base-address f324f000
flash TESTING starts
: Virt addr: 0xf324f000: STRATA-P33 128MB bootflash
cpld0 at obio0 cs 3 addr 0xefdf0000 size 0x8000wdog at cpunode0 not configured
duart0 at cpunode0: 2 ports
com0 at duart0 port 1: ns16550a, working fifo
com0: console
com1 at duart0 port 2: ns16550a, working fifo
duart0: interrupting on irq 26
tsec0 at cpunode0 instance 1: mac-address unknown
tsec at cpunode0 instance 2 not configured
tsec2 at cpunode0 instance 3 phy 1
tsec2: Ethernet address f4:8e:38:03:71:74
brgphy0 at tsec2 phy 1: BCM5461 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mpc_gpio0 at cpunode0
gpio: interrupting on LVL31 (gpio)
l2ecc0 at cpunode0 interrupting on irq 0
ddrc0 at cpunode0: ECC disabled
pq3pcie0 at cpunode0 instance 1: PCI-Express x2 controller
pci0 at pq3pcie0 bus 0
ppb0 at pci0: Freescale Semiconductor product 0x0071 (rev. 0x21)
pci1 at ppb0 bus 1
nbsd_kbde0 at pci1: BCM56845 Trident Switch ASIC, rev. 5
PCI_COMMAND_STATUS_REG VALUE :1048582
BCM device 47173 and revision 5
THIS IS 64 BIT ADDR SPACE
PCI_BAR_LOW :80000004 -- MEMORY MAPPED PCI_BAR_HIGH:0
Address : 0x80000004 Address1 : 0x00000000
Mask : 0xfffc0004 Mask1 : 0xffffffff
PCI BUS HANDLE:80000000 TAG:0xf317d218 ADDR:80000000 SIZE:40000
MEM TAG OF BSC 0xf317d218 VADDR PTR: (0x80000000)
INT REG:00000100
enter :kbde_dmamem_alloc
kva=0xfb263000/0x1000000,map=0xe30440a0,nsegs=1,pa=6000000/1000000
DMA VBASE:0xfb263000 DMA PBASE:6000000
pcie at cpunode0 instance 2 not configured
pcie at cpunode0 instance 3 not configured
diic0 at cpunode0: 2 ports
iic0 at diic0: I2C bus
i2cctl0 at iic0
strtc0 at iic0 addr 0x68 : M41ST84 Real-time Clock/NVRAM
s2eeprom0 at iic0 addr 0x52 : eeprom self s2eeprom0 parent iic0 tag 0xf3118810 type 0x0
s2eeprom1 at iic0 addr 0x54 : eeprom self s2eeprom1 parent iic0 tag 0xf3118810 type 0x0
Caching Technique enabled and allocated Memory=400
s2eeprom1: Device
s2eeprom5 at iic0 addr 0x50 : eeprom self s2eeprom5 parent iic0 tag 0xf3118810 type 0x0
Caching Technique enabled and allocated Memory=400
s2eeprom5: Device
iic1 at diic0: I2C bus
i2cctl1 at iic1
tmp75x0 at iic1 addr 0x49 tmp75x1 at iic1 addr 0x4a tmp75x2 at iic1 addr 0x4d tmp75x3 at iic1 addr 0x4c s2eeprom2 at iic1 addr 0x54 : eeprom self s2eeprom2 parent iic1 tag 0xf311886c type 0x0
Caching Technique enabled and allocated Memory=400
s2eeprom2: Device
s2eeprom3 at iic1 addr 0x50 : eeprom self s2eeprom3 parent iic1 tag 0xf311886c type 0x0
Caching Technique enabled and allocated Memory=400
s2eeprom3: Device
max6651x0 at iic1 addr 0x48 max6651x1 at iic1 addr 0x4b max6651x2 at iic1 addr 0x1b max6651x3 at iic1 addr 0x1f ltc4215x0 at iic1 addr 0x42 ltc4215x1 at iic1 addr 0x40 ehci0 at cpunode0 instance 1: USB controller
spi at cpunode0 not configured
sdhc0 at cpunode0: SDHC controller (DMA enabled)
sdhc0: interrupting on irq 56
sdhc0: SD Host Specification 2.0, rev.1
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
sdmmc0: attach card
ld0 at sdmmc0mid=0x74 oid=0x4a45 pnm="SD " rev=0x10 psn=0x000006af mdt=0f9
: <SD >
ld0: 7832 MB, 3978 cyl, 64 head, 63 sec, 512 bytes/sect x 16039936 sectors
ld0: 4-bit width, bus clock 25.000 MHz
nbsd_ubde pseudo-device
bcnp pseudo-device
bcmw pseudo-device
bcmwstk pseudo-device
bcmws pseudo-device
Too many symbols for tree, skipping 16165 symbols
ust pseudo device
sierradiag as pseudo-device
crshntfy pseudo-device
bfd pseudo-device
bshell pseudo-device
f10logger as pseudo-device getting attached
sfpx pseudo-device
f10mc pseudo-device
platform pseudo-device
root on md0a dumps on md0b
mountroot: trying ffs...
root file system type: ffs
WARNING: clock gained 3389 days
WARNING: CHECK AND RESET THE DATE!
ignoring SIGQUIT SIGTSTP and SIGINFO
add net 127.0.0.0: gateway 127.0.0.1
Reading Release Image at 0x40000 Part: A
Size of ReleaseImage is 48532141 Bytes
RELEASE IMAGE HEADER DATA :
--------------------------
Release Image SW Image Count : 3
Release Image Major-Version : 9
Release Image Minor Version : 7
Release Image Maint Version : 0
Release Image Patch-Version : 0
Release Image Header Size : 140
Release Image Data Size : 48532001
Release Image Platform Type : 8
Release Image Product Name : FTOS-SE
Release Image Checksum Value : 0x1bd73fec
Release Image Header Checksum: 0xce50da3f
Release Image Create Year : 2015
Release Image Create Month : 2
Release Image Create Date : 27
Release Image Create Hour : 7
Release Image Create Minute : 30
Release Image Create Second : 59
SOFTWARE IMAGE HEADER DATA :
----------------------------
Software Image[1] Major Version : 9
Software Image[1] Minor Version : 7
Software Image[1] Maint Version : 0
Software Image[1] Patch Version : 0
Software Image[1] Image type : 2
Software Image[1] Header Size : 100
Software Image[1] Img Data Size : 11008844
Software Image[1] Img Orig Size : 11008844
Software Image[1] Family Code : cp
Software Image[1] Img file Name : CPRPLP-RPM-AP-9.7.0.0.bin
Software Image[1] Hdr Checksum : 0xa4a3d30
Software Image[1] Data Checksum : 0x118f04ab
SOFTWARE IMAGE HEADER DATA :
----------------------------
Software Image[2] Major Version : 9
Software Image[2] Minor Version : 7
Software Image[2] Maint Version : 0
Software Image[2] Patch Version : 0
Software Image[2] Image type : 2
Software Image[2] Header Size : 100
Software Image[2] Img Data Size : 20313574
Software Image[2] Img Orig Size : 61378576
Software Image[2] Family Code : nbsdpcprplp
Software Image[2] Img file Name : NBSDPCPRPLP-RPM-AP-9.7.0.0.bin
Software Image[2] Hdr Checksum : 0xa95465e8
Software Image[2] Data Checksum : 0x5687be82
SOFTWARE IMAGE HEADER DATA :
----------------------------
Software Image[3] Major Version : 9
Software Image[3] Minor Version : 7
Software Image[3] Maint Version : 0
Software Image[3] Patch Version : 0
Software Image[3] Image type : 2
Software Image[3] Header Size : 100
Software Image[3] Img Data Size : 17209283
Software Image[3] Img Orig Size : 38912016
Software Image[3] Family Code : nbsdlibcp
Software Image[3] Img file Name : NBSDLIBCP-RPM-AP-9.7.0.0.bin
Software Image[3] Hdr Checksum : 0x80b4e427
Software Image[3] Data Checksum : 0xd56d75e2
Setting throttling levels...
netbsd:throttle_count 0x1 = 0x6
netbsd:orange 0xc = 0xa
netbsd:red 0x20 = 0x10
...Done
** /dev/rld0g
** File system is clean; not checking
Starting Dell Networking OS
00:00:11: %STKUNIT0-M:CP %RAM-6-ELECTION_ROLE: Stack-unit 0 is transitioning to Management Stack-unit.
00:00:12: %STKUNIT0-M:CP %CRYPTO-5-FIPS_SELF_TEST_PASSED: [sysd] FIPS crypto module self-test passed
00:00:12: %STKUNIT0-M:CP %CHMGR-5-STACKUNIT_DETECTED: stack-unit 0 present
00:00:12: %STKUNIT0-M:CP %CHMGR-5-CAMACL_CONFIG: Sum of cam-acl is not equal to 13.So applying the default config.
00:00:15: %STKUNIT0-M:CP %CHMGR-5-CAMACL_CONFIG: Sum of egress cam-acl is not equal to 4.So applying the default config.
00:00:21: %STKUNIT0-M:CP %CHMGR-5-CHECKIN: Checkin from stack-unit 0 (type S4810, 64 ports)
00:00:22: %S4810:0 %CHMGR-5-FAN_SPEED_CHANGE: Fan speed changed to 60 % of the full speed
00:00:22: %S4810:0 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed changed to 99 % of the full speed
00:00:24: %STKUNIT0-M:CP %CHMGR-2-FAN_TRAY_BAD: Major alarm: fan tray 1 in unit 0 is missing or down
00:00:24: %STKUNIT0-M:CP %CHMGR-0-PS_DOWN: Major alarm: Power supply 0 in unit 0 is down
00:00:24: %STKUNIT0-M:CP %CHMGR-0-PS_UP: Power supply 1 in unit 0 is up
00:00:29: %STKUNIT0-M:CP %RAM-5-STACKUNIT_STATE: Stack-unit 0 is in Active State.
00:00:30: %STKUNIT0-M:CP %CHMGR-5-STACKUNIT_UP: stack-unit 0 is up
00:00:30: %STKUNIT0-M:CP %CHMGR-2-SYSTEM_READY: System ready
This device is configured to enter Bare Metal Provisioning (BMP).
BMP will now attempt to download an image, configuration file or boot script using DHCP.
00:00:36: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
00:00:37: %STKUNIT0-M:CP %CRYPTO-5-FIPS_SELF_TEST_PASSED: [bmp] FIPS crypto module self-test passed
This device is in Bare Metal Provisioning (BMP) mode.
BMP is attempting to download an image, configuration file or boot script using DHCP.Lalu klik ENTER untuk memunculkan menu pertanyaan berikut
To continue with the standard manual interactive mode, it is necessary to abort BMP.
Press A to abort BMP now.
Press C to continue with BMP.
Press L to toggle BMP syslog and console messages.
Press S to display the BMP status.
[A/C/L/S]:% Warning: The bmp process will stop …Pilih A untuk membatalkan BMP dan boot kedalam OS9
Lalu akan muncul output seperti berikut
00:02:50: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
00:02:50: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 11/0
00:02:50: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 10/0
00:02:50: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 9/0
00:02:50: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 8/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 7/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 6/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 5/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 4/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 3/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 2/0
00:02:51: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 1/0
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Ma 0/0
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/60
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/56
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/52
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Fo 0/48
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/47
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/46
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/45
00:02:52: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/44
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/43
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/42
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/41
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/40
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/39
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/38
00:02:53: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/37
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/36
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/35
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/34
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/33
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/32
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/31
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/30
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/29
00:02:54: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/28
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/27
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/26
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/25
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/24
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/23
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/22
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/21
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/20
00:02:55: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/19
00:02:56: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/18
00:02:56: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/17
00:02:56: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/16
00:02:56: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/15
00:02:57: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/14
00:02:57: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/13
00:02:57: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/12
00:02:57: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/11
00:02:57: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/10
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/9
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/8
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/7
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/6
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/5
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/4
00:02:58: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/3
00:02:59: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/2
00:02:59: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/1
00:02:59: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to down: Te 0/0
00:02:59: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
00:02:59: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 0/0
Dell-BMP>00:02:59: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 1/0
00:02:59: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 2/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 3/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 4/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 5/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 6/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 7/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 8/0
00:03:00: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 9/0
00:03:01: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 10/0
00:03:01: %STKUNIT0-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up: Ma 11/0
00:03:01: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful on console
00:03:01: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from EOA0
00:03:04: %STKUNIT0-M:CP %BMP-5-PROCESS_COMPLETED: BMP process is complete. The configuration/script must be saved in order to use it after subsequent reloadsKlik ENTER untuk masuk ke EXEC mode
Dell>Untuk masuk kedalam USER EXEC mode ketik enable
Dell>enableProses reset sudah selesai dan selanjutnya kita bisa melakukan fresh config . Thanks
